Need a new septic system? Need a septic system repair or design? We can help!
To inquire about a septic system design or install, fill out the form below, call/text 513-909-4768 or email design@cindaco.com
Cindaco will be there for you through the entire process:
1. Site Evaluation and Soil Testing
2. Pre-Design Services: Utility locating, dye testing, and system evaluation.
3. Septic System Design and Permitting: New/Replacement systems, Incremental Replacement systems, lot review, subdivision applications, and new construction/additions.
3. Site Preparation, Excavation, and Site Development
4. Septic Tank & Treatment System Installation
5. Drain Field Installation (if applicable)
6. Inspection and Final Approval
7. Start-Up and Maintenance Guidance
Why we're different:
Designers with installation experience. Our team knows more than what's just on paper
Installers with design experience. Our team knows why things go together and how things work, not just how to install them.
We can do all associated/auxiliary services to design: existing tank and field locating, dye testing, project management, system evaluation, repairs to existing systems
Experienced in designing and installing septic systems on difficult sites, specialty projects, and large/small jobs; including properties with poor soil conditions, high groundwater, steep slopes, and limited space.
Cindaco is your one-stop-shop for your home or businesses septic system demands.
Click here to: view installation and operation manuals
Your septic system will typically consist of a buried, watertight septic or treatment tank connected to your home’s plumbing and a drainfield (if applicable) where treated wastewater is slowly dispersed into the ground. The tank separates solids from liquids while bacteria break down waste, and the drainfield uses soil to naturally filter the effluent. Your system may also include a dose tank, which holds effluent and slowly disperses it to the drainfield throughout the day. You may have one of several type of drainfields based on your soil conditions, including leach lines, leach beds, mounds, drip systems, and spray. Some systems, called discharging or off lot systems, may not have a drainfield at all and discharge clean effluent into a drainage way. These systems are used where there is no available space or good soil for a drain field. Actual components and layout vary by design, soil conditions, and local code.
The Ohio EPA distributes financial assistance through grant funding to county health departments to help income-eligible homeowners cover the cost of septic system replacement or repair. Funding availability and structure vary by county: some counties may cover design and installation costs, while others may only help with installation, and the amount paid can depend on household income and eligibility criteria set by your local health department. To participate, you must apply directly to your county health department and be approved before work begins.
Disclaimer: Cindaco is not involved in administering these grant funds or financial support programs, and this information is provided purely for educational purposes.
A mound or soil absorption septic system typically includes a raised sand and gravel mound with buried distribution laterals that evenly disperse treated wastewater into absorbent soil below. From above ground you’ll see a gently graded mound with access risers or lids for maintenance. The system is sized for your home and site conditions to ensure proper septic drainage and wastewater treatment.
Work with an experienced Ohio septic designer like Cindaco as early as possible in the development process. Early septic planning helps determine lot configurations that can support on-site sewage treatment systems while meeting county health department and zoning requirements. Cindaco can coordinate required soil testing, evaluate site constraints, and ensure each lot has adequate space for a primary septic system and a designated replacement area, which must remain undisturbed for future use.
Contact a professional septic designer in Ohio, such as Cindaco, to review your situation and determine available options. Depending on the age, type, and condition of the system, septic system repair may be possible. If replacement is required, Cindaco can assist with septic system design and installation planning in coordination with local regulations.
Contact Cindaco, a trusted Ohio septic design company, to perform soil testing and a full lot feasibility review. This confirms the septic system can be properly located on the property while accounting for the home, accessory structures, setbacks, and required septic reserve areas.
Before construction begins, consult Cindaco to review how the project may impact your existing septic system. It is important to confirm the system is functioning properly, locate all septic components, meet required setbacks, and protect the designated septic replacement area on the property.
Schedule a septic inspection with a qualified provider. Be aware that inspections on vacant homes may be limited, and some Ohio septic systems can be difficult to fully evaluate. Review county health department septic records to understand system history, but note that a passing inspection does not guarantee long-term performance. Consider household size and water usage, as increased flows can overload an existing system. Request septic maintenance records if available.
Contact Cindaco to explore septic repair or septic replacement options. Depending on site conditions and local requirements, repairs or a full system replacement may be necessary. In many cases, funds are placed in escrow and the sales contract may be extended to allow time for septic work to be completed.
Septic design and approval timelines vary by Ohio county health department and project complexity. Straightforward projects may take 2–4 weeks, while complex sites or advanced sewage treatment systems may take 6–9 months.
A passing county inspection does not always mean the septic system is in good condition. If a property is located in a septic area but listed as sewer on the MLS, verify the utility status with the local health department. Request county records and inspection reports to better understand the system’s history and potential future risks.
Septic system size is determined by several factors, including home size, soil conditions, lot layout, and Ohio septic regulations enforced by the local health department.
No. Trees and shrubs should be kept at least 20 feet away from septic tanks and soil absorption areas to prevent root damage. Only grass or shallow-rooted vegetation should be planted over the system.
Protect your investment by properly maintaining the landscape around the system, avoiding trees or shrubs near the drainfield, limiting bleach and antibacterial products, reducing garbage disposal use, and not connecting water softener discharge to the system. Maintain a service contract with a licensed provider and follow a regular septic pumping and maintenance schedule.
Disclaimer: Cindaco is not a regulatory agency or governing authority. Septic system rules, regulations, and maintenance requirements in Ohio are established and enforced by the Ohio Department of Health and local county or municipal health departments. While Cindaco strives to provide accurate and up-to-date information based on industry knowledge and experience, regulations may vary by location and are subject to change. Homeowners are responsible for verifying all applicable requirements with their local health department. Information provided by Cindaco is for general informational purposes only and should not be considered legal or regulatory advice.